templatemaker.nl

A typical paper bag that can be stored completely flat. This template can be used to create both a slick little goodie bag or a large grocery bag. This design is also used a lot for gift wrapping wine bottles. The top of the bag is folded for reinforcement.

En æske med låg – helt enkelt. Højden på låget og afstanden mellem låg og æske (sluppen) kan vælges frit.

A triangle-shaped box that can be used to store pieces of cake.

The box consists of an upper and a lower part. The upper part is the cover. The lower part, the tray, does not need glue because it will be locked by the cover.

By default, the cover is 5% larger then the tray but this can be adjusted in the expert settings.

The angle is a measure for how big a piece of cake can fit in. Look in the figure if you don‘t know what to enter here. For example, an angle of 30º is large enough for 1 piece from a 12-piece cake. The length is the length of the piece, which should be about half the diameter of the complete cake. But, be sure to add quite some allowance here.

En høj, smal æske. God til chokolade, spillekort og lign. Standardstørrelsen er fin til et sæt almindelige spillekort (bridge-størrelse).

Coffin or Casket shaped box for Halloween, decoration or maybe for a deceased pet.

Do you want to serve your ‘trick or treat candy‘ in style? Present the candy in a coffin! This design consists of a box and a lid. Use some extra scotch tape to secure the lid to box, or it might open at midnight… allowing the content to wander around your house. Mwhahahaha!

A cone, optionally with the top cut off. (In that case, it’s called a frustum). Can be used to help create the geometry for a beaker, vase, party-hat or lamp shade. If you'd like a real cone, just use zero for the top-diameter. Tip: do not score or fold the fold line this template to keep seam smooth.

En åben æske. Ubrugelig som forsendelse, men god til at opbevare og udstille ting i.

Box with curved sides. The value for curve size can be either positive or negative. You can enter any value, but do not make the curve too large, or the box will break or buckle when folded. Be aware that the Length and the Width do not take the curve size into account.

En variation over den runde æske.: En oval (eller ellipseformet) æske. Skabelonen indeholder også et låg.

Classical letter envelope, most often used for personal letters.

A box consisting of a tray and a lid. The sides of the tray are not glued, but kept together by the lid. Once the lid is removed, the box ‘explodes’ as the sides fall outward.

Gem stone shaped box, consisting of two identical polygonal pyramids, glued together at their bases. It‘s a real box that can used for packaging. It can be stored (and shipped)completely flat. When you pull the two apices (‘tops’) apart, the box will get it‘s full shape. It‘s easiest to glue this shape when both halves are flat. Just fold the glue tabs all the way in and glue the top to the bottom. Just remember not to glue the rounded flaps.

En almindelig gaveæske. Brug den hvis siderne på din æske ikke afviger for meget fra hinanden.

Ahem… en hjerteformet æske. Ikke fordi jeg er specielt vild med Valentines Dag, men fordi Nirvanas tredje album er konge. Æsken er ikke fuldstændig lukket, de buede sider er ikke limet til bunden. Se flere billeder under . NB! Bredden kan ikke være større end længden. Hvis du prøver vil bredden automatisk være lig med længden.

En æskeformet konvolut

A simple Tray and Sleeve Box. The dimensions are inner dimensions. The clearance is added twice and to both the height and width. The tray can be assembled without glue, although a little glue won‘t hurt, of course.

Tube-shaped box with a gusseted opening. This model will not be water tight if you make it at home, though!

Tube, pipe, cylinder or toilet roll core. Optionally ‘mitered’, which means it is truncated at an angle. With default settings, this template gives a standard toilet roll. You can also choose to have a ‘mitered’ cylinder, with different miter-angles for the top and the bottom and with a twist between these two. Use these settings if you need to create tubes that are welded (or glued) together at an angle.

A cone mitered by two planes at a custom angle. These mitering angles must be quite small. If the template looks really weird, check these mitering angles.

(Only circular and elliptical cone-sections are allowed. Parabolic and hyperbolic cross sections are not possible with this template.)

The top- and bottom miter angles lie within the same plane: the “twist“ parameter as present in the mitered cylinder is not (yet) implemented.

En ganske almindelig æske, men samlet af 6 løsdele. Det giver mulighed før større æsker hvis du kun kan printe i begrænset størrelse.

A basic tray with glued sides and a draft angle. Use 0º if you want a straight sides, but use a larger value if you want trays that can be stacked into eachother.

The length and width are measured at the top, so when you use a non-zero draft angle, the dimensions at the bottom will be smaller.

Because of the draft angle, the trays can be nested. This makes this model ideal as an organizer for storing small items. LEGO®, for example.

If you choose a too large value for the draft angle or a too small value for the height, the draft angle will be adjusted.

Rektangulære former er keeedelige. Hipstere foretrækker parallellepipeder. Parallellepipeden er en æske der “krænger” i 3 dimensioner.

Passepartout, Photo Frame or Shadow Box. Glue-less, hollow, double-walled tray.Can also be used as box insert.

Create a photo frame for your photo‘s with a posh, wide frame.

Enter the dimension of the “inner space“ (the size of the picture or object to display), together with how thick and wide you‘d like the border of the frame to be. The final model will be larger, because of the width of border of the frame. The model can be constructed without using glue, although a bit of glue won‘t hurt.

When used as an insert, you might not need the inner part.

For assembly instructions, have a look at the YouTube-movie

Lad os tilføre siden her lidt lækre kurver… med en pudeformet æske. Vær opmærksom på, at bredden skal være mindst dobbelt så stor som højden.

Models of all five so-called Platonic Solids. The Platonic Solids are the five regular convex polyhedra.

The Cube is the most famous one, of course, although he likes to be called “hexahedron” among friends. Also the other platonic solids are named after the number of faces (or hedra) they have. I.e. Tetrahedron, Octahedron, Dodecahedron, Icosahedron. (Now you know how to count in classical Greek, too!)

There is only parameter：the diameter of the midsphere. The midsphere is the sphere from the center of the object that touches all the edges exactly in middle.

Tube-shaped (or prismatic), polygonal box with gusseted, integrated lid.

This box is very decorative and ideal for gift wrapping odd-shaped presents. The lid uses both mountain and valley folds. The glue tabs on the bottom fit together precisely. The lid will fold easier if you remove some material from the place where the five fold lines meet.

The model does not work for 3 or less sides

This is a prismatic box with a regular polygon as a base. The dimensions determine the geometry of the base. The clearance determines how much the lid is scaled.

A pyramid shape with custom height and a regular polygon as base.

Alle kan få brug for at begrave en Farao. Og så er det belejligt med en pyramide.

En rhombeformet æske. Alle fire sider har den samme længde.

En cylinderformet æske. God som hatteæske eller blot som opbevaringsæske. Hvis du ikke har brug for låget, kan du nøjes med at printe første del (første side).

A basic box like, much like the Card Box and the Gift Box. This specific template is very economical for boxes that have small height compared to both the width and the height, for example a box for a tart or a pizza. Templatemaker.nl will try adjust “impossible” values, be aware of this when, for example, the thumb hole or glue flaps have dimensions that you don't expect.

Collection of the 7 concave polycubes with 4 or less cubes. These seven pieces together can form the SOMA cube. That is, if you manage to solve the puzzle. The SOMA cube was invented by the Danish mathematician and poet Piet Hein.

Denne skabelon bliver opdelt i segmenter som alle er ens. Samles til en kugle (eller globus).

Have you ever dreamed of just sprinkling stars? ✨Now you can, and you can even hide a present in them! The folds are a bit origami-like, score them well and make sure the star is reasonably thick. “5“ Is the ideal number of points, but fewer or more is certainly possible. Shine!

Also called a trapezoidal prism or a trapezoidagon (just to sound impressive). One typical use for this model is packing pralines. It can be the basis for many shapes, as long as the top and bottom are paralel and oposing sides have equal draft angles. If you use yellow or gold paper, you can use it to make paper ‘gold bars’. (Or gold pressed latinum, if you prefer.)

Box insert for thin items. Use this template to create a box insert that locks an item safely in the center of a box. It leaves some extra space for a thumb hole, so it’s easy to retrieve it.